Residential Coating Systems
APC Flake Systems are Decorative, Durable, Hygienic and Easy to Maintain when used as part of the APC Seamless Flooring process.
Inside and Outside options. Suitable for Residential and Commercial applications Flake has become a desirable long-term flooring solution. A great alternative to tiles where grout can absorb unwanted contaminants Flake is seamless and non-porous when installed as a full APC system.
A number of additives or glass shard can be added to the system ensuring Australian standards and slip resistance requirements are met where required.
Traditionally Flake systems are known for their application in garages and school amenities however in recent years with the introduction of the APC contemporary colour range Flake is now widely used in many areas such as;
- Patios & Verandas
- Pool Surrounds
- Residential Interiors
- Rental Properties
APC offer a number of options for top coats;
- Tetrathane® Urethane
- Sparta 80/60 Polyaspartic
- EPO100G® Glaze with a top coat of Tetrathane®, this system gives a high end, glass like finish with depth of coat.
To download brochure click here: Flake Brochure
APC EPO100® Epoxy Resin range is a high-performance product designed for Residential, Industrial and Commercial applications.
With the outstanding chemical resistance, durability, low porosity and strong bond strength EPO100® as a roll coat is idea for a simple garage application.
Applied as an interior system Plain Epoxy can give a high-end designer feel to any home. A clear glaze coat such as EPO100G® can be applied to give the look of depth to the coat like a sheet of glass has been put over the floor.
** Epoxy can be affected by the effects of UV, this does not affect the chemical structure but can leave a slight yellowing hue at the front of the garage. A UV top coat such as Tetrathane Urethane of SPA60 Polyaspatic which both have a high UV resistance and protection.
To download brochure click here: Plain Coat System
The APC Metallic System is decorative, hardwearing and low maintenance. The finished is high end designer finish with a smooth, glass like finish with depth that has a unique and subtle reflective sparkle.
No two floors will ever look the same with endless creative techniques that can be used to create a style that you can call your own. With a modern colour range and the ability to supply special order colour pallet the choices are endless.
To download brochure click here: Metallic System Brochure V6
Traditional Polished Concrete is achieved through a series of mechanically grinding and polishing using products such as APC Grout and Densicure Densifier.
During the concrete polishing installation, the surface is processed through a series of steps using a Diamond Grinder and Polishing Pads which gives a stunning finish to any residential or commercial environment.
Alternatively, there is the APC Cut and Coat System where the concrete is ground down to expose the desired level of stone and then coated with a topical Urethane such as Tetrathane® or Liquathane® or an Epoxy such as EPO100G® Glaze which may also have a Urethane Tetrathane® top coat.
A great advantage of a Cut and Coat system is the finish is non-porous, therefore easier to keep floor stain free and is an easier system to install, typically less time an in most cases will be a more cost-effective alternative to mechanical polish system.
Both systems are very modern, attractive and a long-term solution and a great flooring alternative to other traditional flooring options.
To download brochure click here: Cut & Coat System Brochure