To Download Click Here: Flake Installation Instructions
To Download click here: Flake Brochure
APC Flake Coat Kits
Based on a Standard Double Garage Approx. coverage 120m2
Seamless Flooring Kit with Tetrathane Clear Urethane top coats - UV Stable:
Photos depict a range of APC Flake coat finishes and top coats.
APC Flake Systems are Decorative, Durable, Hygienic and Easy to Maintain when used as part of the APC Seamless Flooring process.
Inside and Outside options.Suitable for Residential and Commercial applications Flake has become a desirable long-term flooring solution. A great alternative to tiles where grout can absorb unwanted contaminants Flake is seamless and non-porous when installed as a full APC system.
A number of additives or glass shard can be added to the system ensuring Australian standards and slip resistance requirements are met where required.
|2||EPO100T®||20L||EPO100T® Epoxy Coating Kit Tinted|
|9||1010||4.5 kg||Australian Paint Chips Flake|
Epoxy Putty is available for Crack Repair prior to application if required.
Traditionally Flake systems are known for their application in garages and school amenities however in recent years with the introduction of the APC contemporary colour range Flake is now widely used in many areas such as;
- Patios & Verandas
- Pool Surrounds
- Residential Interiors
- Rental Properties
- Education Facilities
- Common Areas
- Shopping Centres
- Medical Centres
- Veterinary Clinics
APC offer a number of options for top coats;
- UV stable Tetrathane®
- UV stable & quick return to service Sparta 80/60
- EPO100G® Glaze with a top coat of Tetrathane, this system gives a high end, glass like finish with depth of coat, very desirable for interior application.
Architects, Specifiers & Installers:
Private colour collections available on request.
* Conditions apply.
Note: Prices are based on Australian Paint Chips Flake.
APC Flake Sizing:
LARGE APC FLAKE ACTUAL SIZE
SMALL APC FLAKE ACTUAL SIZE
NANO APC FLAKE ACTUAL SIZE
Spread Rate: EPO100T®; 3 – 6m2 / L (2 coats are required)
1010; 9 – 12m2 (Nano)
10 – 15m2 (Small)
10 – 15m2 (Large)
15 – 20m2 (Jumbo)
500T®; 4 – 6m2 / L
*Read TDS & SDS prior to use.
* Coverage rates for coatings are based on smooth dense surfaces. The surface texture and porosity of the concrete can vary considerably and allowance should be made for this.
* Devices such as digital cameras, computer monitors, printers, and scanners produce colour differently. Therefore, the sample or product may not look exactly like the image that you see on your screenn your screen.
|Kit||2 x 15L Epoxy Resin Tinted PART A EPO100T, 2 x 5L Epoxy Hardener PART B EPO100T, 1 x 10L Epoxy Thinners 150, 9 x 4.5Kg Australian Paint Chips 1010, 3 x 20L Tetrathane 500T|