Ultra Flake Coat Kit 240m2 - Epoxy Supplies
Delivery Australia Wide Daily
Showroom & Warehouse
Queensland / Victoria
1800 437 699FREE CALL

Ultra Flake Coat Kit 240m2 - Crystal Finish

  • Product Code: EPO100FKC-240
  • Availability: In Stock
  • $6,044.01


Available Options


Ultra Flake Coat Kit – Crystal Finish

Based on a standard double garage approx. coverage 240m2.

Seamless flooring kit with a Glaze Entrapment Coat and a UV Stable Tetrathane Clear Urethane top coat.

Photos depict a range of APC Flake coat finishes and top coats.

The Ultra Flake System is decorative, durable, hygienic and easy to maintain when used as part of the APC Seamless Flooring process.

Inside and outside options. Suitable for residential and commercial applications. Flake has become a desirable long-term flooring solution, a great alternative to tiles where grout can absorb unwanted contaminants. Flake is seamless and non-porous when installed as a full APC system.

A number of additives or glass shard can be added to the system ensuring Australian standards and slip resistance requirements are met where required.

Colour Chart

Kit Contains:

Quantity       Code Size  Description
4 EPO100T®    20L EPO100T® Epoxy Coating Kit Tinted               
1 150 10L Epoxy Thinners
16 1010 4.5 kg           Australian Paint Chips Flake
2 EPO100G® 30L EPO100G® Epoxy Coating Kit Glaze
2 500T 20L Tetrathane

 

Epoxy Putty is available for crack repair before application if required.

Traditionally flake systems are known for their application in garages and school amenities. However, in recent years with the introduction of the APC contemporary colour range flake is now widely used in many areas such as;

  • Garages
  • Government Buildings
  • Patios & Verandas
  • Driveways
  • Pool Surrounds
  • Residential Interiors
  • Rental Properties
  • Showrooms
  • Amenities
  • Education Facilities
  • Common Areas
  • Shopping Centres
  • Medical Centres
  • Veterinary Clinics

APC offers several options for top coats;

  • UV stable Tetrathane®
  • UV stable & quick return to service Sparta 80/60
  • EPO100G® Glaze with a top coat of Tetrathane, this system gives a high end, glass like finish with a depth of coat, very desirable for interior application.

Architects, specifiers & installers:

Private colour collections are available on request. 

* Conditions apply.

Note: Prices are based on Australian Paint Chips Flake.


APC Flake Sizing:

​​​​LARGE APC FLAKE ACTUAL SIZE

SMALL APC FLAKE ACTUAL SIZE

NANO APC FLAKE ACTUAL SIZE


Spread Rate: EPO100T®; 3 – 6m2 / L (2 coats are required)
                       1010;            9 – 12m2 (Nano)
                                           10 – 15m2 (Small)
                                           10 – 15m2 (Large)
                                           15 – 20m2 (Jumbo)
                       500T®;         4 – 6m2 / L


*Read TDS & SDS before use.
* Coverage rates for coatings are based on smooth dense surfaces. The surface texture and porosity of the concrete can vary considerably and allowance should be made for this.
* Devices such as digital cameras, computer monitors, printers, and scanners produce colour differently. Therefore, the sample or product may not look exactly like the image that you see on your screen.

Kit
Kit 4 x 15L Epoxy Resin Tinted PART A EPO100T, 4 x 5L Epoxy Hardener PART B EPO100T, 1 x 10L Epoxy Thinners 150, 16 x 4.5Kg Australian Paint Chips 1010, 2 x 20L Epoxy Resin Glaze PART A EPO100G, 2 x 10L Epoxy Resin Glaze PART B EPO100G 2 x 20L Tetrathane 500T

Write a review

Note: HTML is not translated!
    Bad           Good