Slow Cure Clear Epoxy Coating Kit 6L
Delivery Australia Wide - Showrooms & Warehouse QLD & VIC

EPO100SCC Slow Cure Clear Epoxy Coating Kit 6L

  • Product Code: EPO100SCC-06
  • Availability: In Stock
  • $253.00

EPO100SCC Slow Cure Clear Epoxy Resin



EPO100SCC is a high performance 2 pack, clear epoxy which has been designed to cure slower at a lower temperature. EPO100SCC Slow Cure is ideal for use where an extended curing time on application and pot life needs to be a consideration, such as river tables and some forms of artwork, lowering the chances of cracking and allows for deeper pours. 

EPO100SCC Slow Cure Clear has been designed, formulated, and manufactured by All Purpose Coatings in Australia for artists, as the demand increases for Australian made products.

IMPORTANT: 180-minute cure with a 70°C peak exothermic in a 150ml cup.
Refer to the River Table tab for further information.


Suitable For:                                                                                  

  • Australian Made 
  • 100% Solids 
  • Water Clear 
  • No VOC’s  
  • Solvent Free
  • Self Priming
  • Low Viscosity 
  • Installer Friendly 
  • High Gloss
  • Self-Levelling 
  • Excellent adhesion
  • Chemical Resistant  
  • Suitable for deep pours
  • MPa Greater than Concrete
  • River Tables
  • Encapsulating 
  • Deep Pours
  • Casting
  • Artwork






Casting: Maximum 15-20mm depth without exceeding 15L in a single pour. 

*Read the TDS (Technical Data Sheets), SDS (Saftey Data Sheets) and installation instructions prior to use.

Write a review

Note: HTML is not translated!
    Bad           Good