Epoxy Coating Kit Custom Tint 20L - Epoxy Supplies
Delivery Australia Wide Daily
Showroom & Warehouse
Queensland / Victoria
1800 437 699FREE CALL

EPO100T® Epoxy Coating Kit 20L - Custom Tint

  • Product Code: EPO100T20-CT
  • Availability: In Stock
  • $520.00

Available Options

To Download Click Here: Plain Epoxy Installation Instructions


To Download click here: Plain Coat System

Epoxy Resin Tinted EPO100T® 

Key Features

 Suitable for Residential, 
 Commercial & Industrial 

Hot Tyre Resistant

 205+ Colour Choices 

100% Solids
 Premium Formulation 

Conforms to APAS 0209


About EPO100T®

EPO100T® is a High Performance Industrial Epoxy that is 100% solids, solvent free, two-pack cycloaliphatic amine cured epoxy resin matrix system which has been designed and manufactured by APC. EPO100T® Epoxy flooring resin is designed as a stand-alone topcoat or as a binder for non-skid surfaces.

Designed for use in a wide range of commercial & industrial environments where a lasting solution to floor maintenance problems is required. The exceptional resistance to a wide variety of chemical spillage and fumes makes this product ideal for use in high traffic commercial and industrial environments.

Commonly used as part of the Australian Paint Chips flake system as a primer and base coat in one, reducing the need to have additional products onsite.

EPO100T® Epoxy Resin is designed as a long term flooring and wall solution. 

EPO100T® Epoxy is both a DIY and trade product which is highly user and installer friendly.

Colour Chart

Product Attributes

Suitable For

  • No VOC's (Volatile Organic Compounds)
  • Solvent Free
  • Low Viscosity
  • User Friendly
  • High gloss
  • Self-levelling
  • Excellent adhesion
  • Chemical resistant
  • High build application
  • Abrasion Resistant
  • Bond strength stronger than concrete
  • Food Contact Safe:- Federal Regulations Code
  • Food manufacturing
  • Government Buildings
  • Wastewater Treatment Plants
  • Warehouse
  • Mechanical Workshops
  • Commercial Kitchens
  • Amenities
  • Educational Facilities
  • Residential Garages
  • Internal Systems
  • Primer & Base coats for APC Flake Systems
  • Primer & Base coats for APC Metallic & Marble System

Spread Rate: 3 – 6m2 / L (2 coats are required)

*Read the TDS and SDS prior to use
*Devices such as digital cameras,computer monitors, printers, and scanners produce colour differently. Therefore, the sample or product may not look exactly like the image that you see on your screen. 
*Coverage rates for coatings are based on smooth dense surfaces. The surface texture and porosity of the concrete can vary considerably and allowances should be made for this.
*Premium colour range will attract a surcharge.
Kit 1 x 15L Epoxy Resin Tinted PART A EPO100T 1 x 5L Epoxy Hardener PART B EPO100TH

Write a review

Note: HTML is not translated!
    Bad           Good