Epoxy Resin Clear 15L - Epoxy Supplies
Delivery Australia Wide - Showrooms & Warehouse QLD & VIC

EPO100C® Clear Epoxy Coating Kit 15L

  • Product Code: EPO100C-15
  • Availability: In Stock
  • $380.00

Frequently Asked Questions

What is the difference between EPO100G® Glaze & EPO100C® Clear?

APC Formulate & Manufacture two different forms of clear epoxy resin. It's important you use the correct resin in order to ensure a successful outcome of your project. APC Clear Resin (EPO100C®) is used for high-build applications over 4mm. Such as repairs, mortar & casting. APC Glaze Resin (EPO100G®) is used for roll/pour on applications where the depth of the product is less than 4mm. Using EPO100C® in applications thinner than 4mm will result in adverse effects like Fish-eyeing and bubbling. Glaze in depths over 4mm can appear cloudy/foggy.

Can EPO100® Clear be applied directly to concrete?

For roll on applications, you should use Epoxy Glaze.

How long do I have to work with EPO100C®, should I allow the mix to stand?

All resins manufactured by All Purpose Coatings do not require a standing period in order to allow for the product to begin curing. Once Part A and Part B have been mixed, curing begins immediately. Working time is approximately 40 mins in the bucket depending on the humidity and temperature of the work area.

Does EPO100C yellow when exposed to sunlight?

Whilst Epoxy Clear is an ultra-clear, low yellowing epoxy, exposure to sunlight will still cause the epoxy to yellow off. In order to prevent this you can apply a UV top coat such as; SPA60, SPA80 or Tetrathane®. Using such top coats will allow the system to be installed outside or inside. Yellowing is not limited to All Purpose Coatings range of epoxies and is a typical property of any manufactured resin system. 

EPO100C® Clear Epoxy Resin 


EPO100C® Clear Epoxy is a high performance 2 pack, industrial epoxy which has been designed, formulated and manufactured by All Purpose Coatings. EPO100C® is specifically designed to be used as a binder for epoxy mortar coving, concrete repairs, falls to waste, ramping, encapsulation and casting.

The exceptional resistance to a wide variety of chemicals and fumes makes this product ideal for use in heavy industrial environments where high chemical resistance is required.

EPO100C® Clear Epoxy is designed for use in high-build applications over 4mm, such as repairs, mortars & casting.

IMPORTANT - EPO100C® Clear Epoxy should not be used as a roll coat system, for a roll coat system refer to EPO100G® Glaze Epoxy.

River Tables - Please refer to the River Tables page for an overview of our products recommended for use in river tables.


Suitable For:                                                                                    

  • Australian Made 
  • 100% Solids 
  • Water Clear 
  • No VOC’s  
  • Solvent Free
  • Self Priming
  • Low Viscosity 
  • Installer Friendly 
  • High Gloss
  • Self-Levelling 
  • Excellent adhesion
  • Chemical Resistant 
  • High Build Application 
  • Abrasion-Resistant 
  • Suitable for deep pours
  • MPa Greater than Concrete
  • Residential 
  • Commercial 
  • Industrial 
  • Government 
  • Mining 
  • Epoxy Mortar Coving
  • Concrete Repairs 
  • Falls to Waste 
  • Anchoring
  • Encapsulating 
  • Structural Casting 
  • Concrete Filler and Repairs
  • Binder for Slip-Resistant Surfaces
  • River Tables 
  • Casting
  • Artwork

For more information on the differences between Glaze and Clear Epoxy, please see the below video.

Spread Rate: 1L/1m2 = 1mm in depth
Casting: Maximum 10-15mm in depth without exceeding 15L in a single pour. 

*Read the TDS (Technical Data Sheets), SDS (Saftey Data Sheets) and installation instructions prior to use.

Kit 1 x 10L Epoxy Resin Clear EPO100C 1 x 5L Epoxy Hardener EPO100CH

Write a review

Note: HTML is not translated!
    Bad           Good